Seedream 5.0 Flash Image to Image: Edit and Combine Photos

Last verified: November 1, 2026

Seedream 5.0 Flash can make a precise edit at a location you specify, using coordinates, a selection box or an arrow. It can also build one new image out of several reference photos. To use this, load the photo you want changed (or the set of references you want merged) into Add Image, write the change in Prompt and choose the frame in Aspect Ratio. Its 21:9 option shapes a Seedream 5.0 Flash image-to-image edit for an ultra-wide banner, a site header or a cinematic still.

Speed is the other reason to pick it for editing. Seedream 5.0 Flash generates images faster and is meant for latency-sensitive applications. That fits how image-to-image work usually goes: you try a change, look closely, tighten the instruction and run it again. Every pass starts from your files and your words, so give each one a clean source image and a specific instruction.

Explore more image to image

Seedream 5.0 Flash Editing Specs at a Glance

What you can upload, which frames and sizes you can pick, and what each run gives you.

Input

Up to 10 images (JPG, JPEG, PNG or WEBP, up to 10 MB each) + a text prompt of up to 5,000 characters

Resolution

1K or 2K

Aspect Ratio

1:1, 4:3, 3:4, 16:9, 9:16, 2:3, 3:2, 21:9

Output Format

JPEG or PNG

Output

1 image per run

Getting Better Edits From Seedream 5.0 Flash

Refining an Edit Over Several Short Rounds

Seedream 5.0 Flash is recommended for faster image generation in latency-sensitive applications, so several short passes are a better route to a finished edit than one overloaded prompt. Download the result, add it back in Add Image, and change one thing in Prompt each round, for example the lighting first, then a color, then a detail. That way you can tell which instruction caused which change. Keep Aspect Ratio the same between rounds so the frame doesn't shift.

How to Edit Images With Seedream 5.0 Flash

Five steps take you from uploading a photo to downloading the edit.

1

Upload Your Photos in "Add Image"

Add the photo you want changed, or the group of references you want merged, in "Add Image". The accepted file types, sizes and number of files are listed in the FAQ below. Use the sharpest, least-compressed copy you have. If you're combining several images, crop each one around the element you want used so your instruction can point to it clearly.
2

Describe the Change in the "Prompt" Box

In "Prompt", write what should change and what should stay as it is. The box holds up to 5,000 characters, which is enough for a detailed brief. With several uploads, refer to each image by what it shows (the green bottle, the marble counter) so the instruction maps clearly onto the references. If you only have a rough idea, the "Enhance Prompt" button under the box suggests fuller versions. Your text changes only when you pick one.
3

Pick "Aspect Ratio", "Resolution Quality" and "Output Format"

"Aspect Ratio" starts at 1:1 and also offers 4:3, 3:4, 16:9, 9:16, 2:3, 3:2 and 21:9. Set it for where the image will be used, not for the shape of the source photo. "Resolution Quality" defaults to 1K, with 2K available: test edits at 1K and switch to 2K for the version you keep. In "Output Format", choose PNG for a result you'll edit again and JPEG for a lighter file for web and social posts.
4

Start the Run With "Generate"

Click "Generate" once the images, the prompt and all three settings are in place. Reread the instruction first: a prompt that says clearly what to keep can save you a second attempt.
5

Download the Result

Zoom in on the areas you asked to change and on everything that should have stayed the same, such as product labels, faces, hands and small text. Then download the image in the format you chose.

Edit Your Own Images or Start From Text?

How editing your own images with Seedream 5.0 Flash compares with prompt-only generation on the same model.

Starting point You begin with one or more of your own images plus a written instruction, and the model produces a single new image from those references and the prompt. Text To Image begins with a written prompt alone, and the same model generates a single image from that text. Choose image-to-image when you already have a photo, product shot or sketch to work from, and choose Text To Image when the idea exists only in words.
Showing a specific real subject The uploaded photo supplies the subject itself, so a particular product, room or person goes into the run as an image rather than a description. In Text To Image the prompt defines the subject entirely, so your wording has to carry every detail of how it should look. Pick image-to-image when one exact item has to appear, such as your own product or interior, and Text To Image for concepts where any convincing version of the subject will do.
Use Seedream 5.0 Flash on your own images when an existing photo should shape the result. Switch to Text To Image when you're starting from an idea with nothing to upload.

Seedream 5.0 Flash Editing Problems and How to Fix Them

Fixes for the upload, prompt and framing problems that come up most often when editing with Seedream 5.0 Flash.

My photo won't upload in Add Image

Usually the file doesn't meet the uploader's requirements: its format isn't on the accepted list, it's over the size cap, or it's smaller than the minimum dimensions. Convert it to an accepted format, export a lighter copy if it's too heavy, or use a larger original if it's too small. The exact limits are in the upload FAQ. Then add the file again.

It won't let me add all my reference images

Add Image has a fixed limit on how many files one run takes, and it matches the number of reference images Seedream 5.0 Flash is documented to accept. Keep the images that carry information the prompt can't, like the exact product, a face or a pattern. Drop near-duplicates and anything you could describe in a phrase, then generate.

My prompt gets cut off and I can't type any more

The Prompt box has a character limit, and long briefs reach it quickly when they describe every reference in detail. Cut repeated adjectives, identify each image with a single short phrase, and spend the remaining words on what should change and what must stay. Then run it again.

The edit changed the wrong object, or too much of the image

Without a marked location, the words alone have to identify the target, which is hard when similar objects share the frame. Seedream 5.0 Flash accepts edit locations given by coordinates, selection boxes and arrows. Mark the target with a box or arrow before uploading, write the change as applying to the marked area, and add a sentence listing what must stay untouched. Then run it again.

My result came out square instead of matching my photo

Aspect Ratio doesn't follow the shape of the uploaded photo. It stays on its default square setting until you change it. Pick the ratio you need before clicking Generate, then run the edit again.

Frequently Asked Questions

What files can I upload to Seedream 5.0 Flash for editing?

Add Image takes 1 to 10 images per run in JPG, JPEG, PNG or WEBP format. Each file can be up to 10 MB and must be at least 300×300 pixels. One image is enough for a simple edit. Add more when the result should combine elements from several photos.

Can I turn a square or portrait photo into an ultra-wide banner image?

Yes. Choose the widest frame in Aspect Ratio before you generate, and the result comes back in that shape. That frame is much wider than most source photos, so say in the prompt what should extend across the sides, such as more coastline, a longer counter or open sky for a headline. That way the extra width holds something you chose.

How is the cost of a Seedream 5.0 Flash edit worked out?

The credit cost of a run is calculated from the options you choose. Once you're signed in, it appears above the Generate button, so you can check it before you start. Suggestions from Enhance Prompt don't use credits.

Why do I get only one image per run, and how do I get more versions?

Each run returns a single image. The model's documented editing scenarios, with one reference or several, each produce one image. For alternatives, run again with a reworded instruction, a different set of references or another Aspect Ratio, then compare the downloads side by side.